This study aims to evaluate the FGH96 superalloy joints fabricated by inertia friction welding (IFW) in different welding parameters, such as initial rotational speed and axial friction pressure, where the moment of inertia remained constant. The microstructure and the width of the weld nugget zone (WNZ) were analyzed, and tensile property of joints was examined. The effect of welding parameters on high temperature tensile property of FGH96 joints was investigated. The results show that the joint presents a significant microstructure change across the faying interface, characterized by the very small uniform equiaxed grains of WNZ, coarse and fine grain coexistence of the thermo-mechanically affected zone (TMAZ). As the rotation speed increases, the tensile property remains constant. However, with increasing friction pressure, they show a substantial increase.The change tendency of the width of WNZ with welding parameters is in agreement with that of tensile property, which is related to the weld heat input and the plastic flow of the material. The high temperature tensile specimens are fractured in the WNZ. This is related to the complete γ′-phase dissolution which softens the joint and decreases the joint tensile property. Therefore, the post-weld heat treatments are necessary for IFW FGH96 superalloy in order to further improve the joint properties.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Effect of welding parameters on microstructure and high temperature tensile properties of FGH96 superalloy inertial friction welded joints


    Beteiligte:
    YANG Jun (Autor:in) / LI Jinglong (Autor:in) / DONG Dengke (Autor:in) / LIAO Jianghai (Autor:in)


    Erscheinungsdatum :

    2019




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    Effect of Hot Deformation on PPB Precipitations and Microstructure in P/M Superalloy FGH96

    LIU Changkui / WEI Zhenwei / ZHANG Jiaqing et al. | DOAJ | 2018

    Freier Zugriff

    Effect of Welding Parameters on the Microstructure and Tensile Properties of Friction Stir-Welded DP600 Steel

    Ashrafi, Hamid / Ahl Sarmadi, M. / Shamanian, M. et al. | SAE Technical Papers | 2019


    Effect of Deforming Temperature and Strain on Abnormal Grain Growth of Extruded FGH96 Superalloy

    WANG Chaoyuan / DONG Yunpeng / SONG Xiaojun et al. | DOAJ | 2016

    Freier Zugriff

    Interfacial reaction between mullite-based inclusions and PM superalloy FGH96

    ZHANG Yibo / ZHENG Liang / XU Wenyong et al. | DOAJ | 2022

    Freier Zugriff

    Microstructures and Properties of FGH96/DD6 Joints Brazed at Vacuum Pressure State

    ZOU Wenjiang / CHEN Bo / CHENG Yaoyong et al. | DOAJ | 2017

    Freier Zugriff