Exoskeleton robots are a rising technology in industrial contexts to assist humans in onerous applications. Mechanical and control design solutions are intensively investigated to achieve a high performance human-robot collaboration (e.g., transparency, ergonomics, safety, etc.). However, the most of the investigated solutions involve high-cost hardware, complex design solutions and standard actuation. Moreover, state-of-the-art empowering controllers do not allow for online assistance regulation and do not embed advanced safety rules. In the presented work, an industrial exoskeleton with high payload ratio for lifting and transportation of heavy parts is proposed. A low-cost mechanical design solution is described, exploiting compliant actuation at the shoulder joint to increase safety in human-robot cooperation. A hierarchic model-based controller with embedded safety rules is then proposed (including the modeling of the compliant actuator) to actively assist the human while executing the task. An inner optimal controller is proposed for trajectory tracking, while an outer safety-based fuzzy logic controller is proposed to online deform the task trajectory on the basis of the human's intention of motion. A gain scheduler is also designed to calculate the inner optimal control gains on the basis of the performed trajectory. Simulations have been performed in order to validate the performance of the proposed device, showing promising results. The prototype is under realization.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Mechanical and control design of an industrial exoskeleton for advanced human empowering in heavy parts manipulation tasks


    Beteiligte:
    Mauri A. (Autor:in) / Lettori J. (Autor:in) / Fusi G. (Autor:in) / Fausti D. (Autor:in) / Mor M. (Autor:in) / Braghin F. (Autor:in) / Legnani G. (Autor:in) / Roveda L. (Autor:in) / Mauri, A. / Lettori, J.

    Erscheinungsdatum :

    2019-01-01



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :

    DDC:    629



    Mechanical and Control Design of an Industrial Exoskeleton for Advanced Human Empowering in Heavy Parts Manipulation Tasks

    Mauri, Alessandro / Lettori, Jacopo / FUSI, GIOVANNI et al. | BASE | 2019

    Freier Zugriff

    Shared Control for Human-Robot Cooperative Manipulation Tasks

    Petrič, Tadej / Cevzar, Mišel / Babič, Jan | Springer Verlag | 2017


    Vision Based Robotic Interception in Industrial Manipulation Tasks

    Ahmet Denker / Tuğrul Adıgüzel | BASE | 2007

    Freier Zugriff

    Advantages of the Incorporation of an Active Upper-Limb Exoskeleton in Industrial Tasks

    Blanco, Andrea / Catalán, José M. / Díez, Jorge A. et al. | TIBKAT | 2020


    Investigation of Human Cargo Handling in Industrial Exoskeleton

    Yatsun, Andrey / Jatsun, Sergey | IEEE | 2018