Trabajo presentado al ICRA 2008 celebrado en Pasadena (USA) del 19 al 23 de mayo. ; Many different robotic in-parallel structures have been conceived as six-component force sensors. In general, they perform well for most applications but, when accuracy is a must, two main limitations arise. First, in most designs, the legs are connected to the base and the platform through ball-and-socket joints. Although the dry friction in each of these joints can be individually neglected, the integrated effect of twelve such elements becomes noticeable. Second, dynamical measurements might not be very accurate because the natural resonance frequency of the used structures is quite low even for relatively small dimensions. This dynamical response can be obviously modified with a proper mechanical design, but this increases the complexity of the sensor. This paper discusses the design and implementation of a touch pad based on a 6-axis force sensor and shows how the above limitations degrade its behavior. Moreover, it is shown how using a tensegrity structure both problems could be alleviated because ball-and- socket joints can be substituted by point contacts and the resonance frequency of the structure can be controlled by adjusting the static tensions of the tendons. ; This work was supported by projects: 'Analysis and motion planning of complex robotic systems' (4802), 'Plataforma torsométrica basada en estructuras de tensigridad' (3707), 'Estació de muntatge universal' (I-00907). This work has been partially supported by the Spanish Ministry of Education and Science through the I+D project DPI2007-60858, by the XARTAP network of the Catalan Government, and by the Spanish I3 project with reference 2006-5-01-077. ; Peer Reviewed


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    A wrench-sensitive touch pad based on a parallel structure


    Beteiligte:
    Frigola, Roger (Autor:in) / Ros, Lluís (Autor:in) / Roure, Francesc (Autor:in) / Thomas, Federico (Autor:in)

    Erscheinungsdatum :

    2008-01-01



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :

    DDC:    629



    A wrench-sensitive touch pad based on a parallel structure

    Frigola Alcalde, Roger / Ros Giralt, Lluís / Roure Fernández, Francisco et al. | BASE | 2008

    Freier Zugriff

    Connection structure connected between wrench head of torque wrench and socket

    HSIEH WEI-NING | Europäisches Patentamt | 2020

    Freier Zugriff

    Wrench, Spanner

    SAE Technical Papers | 2021


    Connection structure connected between wrench head of torque wrench and socket

    HSIEH WEI-NING | Europäisches Patentamt | 2019

    Freier Zugriff

    Duplex Wrench

    Canada, C. N. | NTRS | 1987