Flight vehicles that fly at high Mach speeds will be exposed to a severe aerodynamic heating problem, which leads to high surface temperatures and large temperature gradients. Thermal load will induce thermal stress, thermal deformation, and even thermal buckling. Therefore, the dynamic stiffness and the modal characteristics will be affected. In this paper, several tests are carried out for a plain woven carbon-fiber-reinforced silicon carbide (C/SiC) composite plate under elevated temperature. The plate is heated by a quartz-lamp radiation heating system. A three-dimensional digital image correlation system is first employed to obtain the relationship between displacements and temperature to get the critical buckled temperature. Then, the thermal modal tests are performed by a laser scanning vibrometer to investigate the effect of thermal loads on modal parameters: especially the effect of the critical buckled temperature. A specific fixture with water cooled is designed in order to avoid the influence of the uncertainty of the boundary condition since the modal parameters are very sensitive to the boundary condition. Finally, the numerical simulation process of the high-temperature modal tests for the buckled plate is presented to investigate the contributions from temperature-dependent material properties and thermal stresses. As the temperature increases, the modal frequencies reduce. After the critical buckled temperature, the modal frequencies increase. A parametric study is further performed using the presented numerical model to investigate the thermal modal characteristics of C/SiC composite plates with various thickness and boundary conditions.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modal Characteristics of Carbon Fiber Reinforced Composite Structure at High Temperature


    Beteiligte:
    Zhengping, Zhang (Autor:in) / Hao, Cheng (Autor:in) / Fang, Ren (Autor:in) / Zhenqiang, Wu (Autor:in) / Haibo, Li (Autor:in) / Fanjin, Kong (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2020-07-10


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Composite roof with temperature compensation fiber reinforced structure

    NEWCOMB BRADLEY A / HUANG XIAOSONG / MOUROU JULIEN P | Europäisches Patentamt | 2023

    Freier Zugriff

    Hole making characteristics of novel domestic T800 carbon fiber reinforced composite

    DONG Huimin / WANG He / MENG Fanxing et al. | DOAJ | 2023

    Freier Zugriff

    Carbon-fiber-reinforced plastic structure

    WAKU HIROYUKI | Europäisches Patentamt | 2019

    Freier Zugriff

    Porous carbon fiber reinforced rubber composite material

    BARRERA-MARTINEZ CINDY SOFIA / TARDIF JOHN L / ZHAO WENQI et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    TUBULAR FIBER STRUCTURE AND FIBER REINFORCED COMPOSITE MATERIAL

    HORI FUJIO / KAMIYA RYUTA | Europäisches Patentamt | 2020

    Freier Zugriff