Microchannels are used for the cooling of electronic chips. However, the three-dimensional computational fluid dynamics modeling of the large number of channels in a full chip requires a huge number of meshes and computation time. Although porous media modeling of microchannels can significantly reduce the effort of simulation, most previous porous media models are based upon the assumption that the surface heat flux or temperature is uniform on the chip. In reality, the heat flux on the chip is usually highly nonuniform. In the present study, the porous media model considers the simultaneously developing entrance effect at the microchannel inlet and the thermally developing entrance effect due to the severe heat flux variation along the channel. Duhamel’s integral is used to provide the Nusselt number distribution corresponding to the nonuniform heat flux distribution along the channel. The computing cost of this modeling method is only about 1% of the three-dimensional conjugate simulation. This porous media thermal modeling method is applied to model two full-scale electronic chips with realistic power distributions on the surfaces, and temperature maps are generated. The porous media thermal modeling offered by this study is an accurate and efficient alternative for modeling the electronic chips cooled by microchannels.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Porous Media Modeling of Microchannel Cooled Electronic Chips with Nonuniform Heating


    Beteiligte:
    Li, Yubai (Autor:in) / Yao, Shi-Chune (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2015-01-02


    Format / Umfang :

    10 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Thermal Design and Optimization of a Microchannel Cooled Integrated Power Electronic Module

    Mital, Manu / Zhao, Mingyuan / Scott, Elaine et al. | AIAA | 2006


    Thermal Design and Optimization of a Microchannel Cooled Integrated Power Electronic Module

    Mital, M. / Zhao, M. / Scott, E. et al. | British Library Conference Proceedings | 2006




    Thermal Resistance of a Convectively Cooled Platewith Nonuniform Applied Flux

    G.E. Schneider / M.M. Yovanovich / R.L.D. Cane | AIAA | 1980