Fuel-film cooling is necessary to mitigate heat transfer in high-pressure oxygen-rich staged combustion engines. A 4.8 MPa (700 psia) axisymmetric kerosene– H 2 O 2 combustor used fuel-film cooling to deposit carbonaceous material on removable metal samples. Posttest inspection of the samples revealed a two-layer structure, with a tenacious dense lower layer and a soot-like upper layer. Total deposit depth was measured using an optical profilometer and was repeatable between tests at the same conditions. Combustor conditions of fuel-film flow rate, bipropellant run time, fuel composition, chamber liner material, and chamber liner surface roughness were varied to determine their effects on total carbonaceous deposit depth as a function of position and time. Increasing the fuel-film flow rate by 40% resulted in similar deposit depths to lower fuel-film flow rates, but for longer axial lengths. Longer run times resulted in thicker deposits. The use of lower thermal conductivity chamber liners resulted in three to four times more deposits.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Carbonaceous Deposits in a Fuel-Film-Cooled Rocket Combustor: Optical Profilometry


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2021-03-31


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Carbonaceous Deposits in a Fuel-Film Cooled Rocket Combustor: Electron Microscopy

    Piper, Philip M. / Pourpoint, Timothée L. | AIAA | 2021


    Carbonaceous Deposits in a Fuel-Film-Cooled Rocket Combustor: Heat Flux Measurements

    Piper, Philip M. / Gabl, Jason R. / Pourpoint, Timothée L. et al. | AIAA | 2021


    Carbonaceous Deposit Density in a Fuel-Film-Cooled Rocket Combustor

    Piper, Philip M. / Pourpoint, Timothée L. | AIAA | 2022


    Experimental Investigation of Fuel Cooled Combustor

    Taddeo, Lucio / Gascoin, Nicolas / Chetehouna, Khaled et al. | AIAA | 2016


    Evaluation of Metallic-tube-cooled C/C Composite Structure by Rocket Combustor

    Takegoshi, Masao / Ono, Fumiei / Ueda, Shuichi et al. | AIAA | 2007